51 43 148Removing and installing or replacing trim on left or right door pillar (top)

R55 right side only:

Lever out protective cap (1) and release screw underneath.

Tightening torque 51 43 2AZ.

Feed out trim (2) in inward direction and remove.

Installation:

Make sure door seal (3) is correctly seated.


Lever out protective cap (1) and release screw underneath.

Tightening torque 51 43 2AZ.

Detach panel (2) from clip (5) towards inside.

Only if replacing, release belt strap (3) (see last work step).

Installation:

If necessary, replace faulty clip (5).

Make sure door seal (4) is correctly seated.


Version with light package:

Release cable holder (1) and disconnect plug connection (2).

Installation:

Make sure LED (3) is correctly seated.


Replacement:

Release screw (1).

Tightening torque 72 11 4AZ.

Feed out belt strap from trim for door pillar.

Sponsored links