65 12 071Removing and installing or replacing amplifier

Important!
Read and comply with notes on protection against electrostatic damage (ESD protection).

Note:
Comply with notes and notes on handling optical fibres.
Necessary preliminary tasks:

Removal:
Fold up insulating mat (1).

Release screws (1).

Remove amplifier with holder (2).

Unlock and disconnect the connector (1).

Unclip cable tie (2).

Remove amplifier with holder (3).

Replacement:

Release screw (1).

Remove amplifier (2) from holder (3) in direction of arrow.

Note:

Lugs (1) must be correctly slid into guide (2).

Check that amplifier (3) is securely seated.


Installation:

Position amplifier with holder (3).

Connect and lock the connector (1).

Clip in cable clip (2).

Correctly position amplifier with holder (2).

Tighten down screws (1).

Lay insulating mat (1) correctly.
Required reworking:

Replacement:

With Harman Kardon version, perform vehicle programming/encoding.

Sponsored links