Functional Description (FUB) Fuse box

Functional description Fuse box Fuse box Due to the steady increase in the number of electrical functions in the areas of comfort, communication and safety in vehicles, the voltage ... are applied. Sufficient voltage supply is thereby ensured in all operating ranges. The fuse box (also called "battery power distribution box") is installed on the battery ...

Functional Description (FUB) Fuse box

Functional description Fuse box Fuse box The fuse box is used for voltage supply. The following consumers are currently connected via a fuse to the fuse box: Hydraulic pump in the Dynamic Stability Control (DSC) Functional description The power distribution box on the vehicle battery supplies the fuse box with terminal 30. The fuse box will also supply the front ...

Functional Description (FUB) Fuse box

Functional description Fuse box Fuse box The fuse box is used for voltage supply. The following consumers are currently connected via a fuse to the fuse box: Power Control Unit (PCU) Functional description The auxiliary battery supplies the fuse box with terminal 30. The fuse box will also supply the DC/DC converter in the Power Control Unit (PCU) with terminal 30 ...

Functional Description (FUB) Fuse box 2

Functional description Fuse box 2 Fuse box 2 Fuse box 2 is also called the "distribution box for battery 2". The vehicle has multiple internal power distribution boxes ... description The auxiliary battery supplies the fuse box 2 with terminal 30 via the positive battery lead. The positive battery lead is connected directly at the distribution box for terminal 30 ...

Tightening Torques (AZD) fuse box

61 Electrical system 61 13 fuse box Type Thread Tightening specification Measure 1AZ Battery positive lead M8 15 Nm 2AZ Positive lead to fuse box M8 15 Nm 3AZ Screw connection, EMC plates M6x12 5 Nm ...

Repair Instructions (REP) Removing and installing/replacing fuse box for vehicle interior

61 13 050 Removing and installing/replacing fuse box for vehicle interior Warning! Observe safety informations for handling vehicle battery. Necessary preliminary work: Clamp off ... all other plug connections. Replacement: Remount the junction box electronics Remount the fuses. ...

Repair Instructions (REP) Replace electrical steering box (EPS)

32 13 071 Replace electrical steering box (EPS) Only for hybrid cars: Warning! The following points must be strictly observed prior to starting work: Observe safety information ... : Disconnect battery earth lead Note: High-current-carrying wiring laid with terminal 30 (80 A fuse). Remove underbody protection Remove cover for steering assemblies on left and right Remove ...

Functional Description (FUB) Capacitor box

... Capacitor box 2 Three-pin plug connection 3 Ignition capacitor 4 Fuse 5 Power supply for the EPS unit 6 Power distribution box with voltage supply from the positive battery connection point 7 Ground connection for the capacitor Structure and inner electrical connection A fuse, power distribution box and a capacitor are installed in the capacitor box. The power ...

Repair Instructions (REP) Removing and installing/replacing electronics box
Applies to: TU

12 90 ... Removing and installing/replacing electronics box Important! Read and comply with notes on protection against electrostatic damage (ESD protection). Note: Follow instructions ... ). Remove heat shield (3). Release screw (1). Lay filler neck (2) for windscreen washer fluid to one side. Release screws (1). Tightening torque 12 90 2AZ. Remove electronics box cover ...

Repair Instructions (REP) Removing switch for glove box light

61 31 330 Removing switch for glove box light Necessary preliminary tasks: Remove right glove box with housing Unlock switch for glove box light (1) on both sides and press in direction of arrow out of glove box (2). Installation: Make sure switch for glove box light (1) is correctly seated. ...

Wiring Diagram (SSP) Cooler box

Cooler box SP0000050324 10371 Cooler box Z2 Fuse holder, rear 15N F128 10A Z2*9B 2 GN/SW 0.75 15N<128 GR/RT 0.35 58G X56*1V A129 Cooler box 31 31 31 A129*1B 2 BR 0.75 31L Z10*8B 1 A129*1B 3 0140 6100 ...

Repair Instructions (REP) Removing and installing A/C insulating box

52 25 ... Removing and installing A/C insulating box Necessary preliminary work: Remove upholstery for rear seat Release screws (1). Remove insulating box. ...

Wiring Diagram (SSP) Transfer box

Transfer box SP000005391910485Transfer box Z2 Fuse holder, rear 30 F178 30A 30B F138 5A RS 0.5 FR_BP GN 0.5 FR_BM RS/RT 0.35 FR_BP GN/RT 0.35 FR_BM GN 0.5 15WUP RT 0.5 30B<138 RT/WS 2.5 30<178 6 X8603 7 3 8 1 Z2*3B 2 RT/BR 2.5 30<178 X8603 2 BR 2.5 31 Z2*7B 9 RT/GE 0.35 30B<138 4 X13*3B 2 11 X13*2B 12 A79 Transfer box 31 31 31 31 X16710 A51 Central ...

Repair Instructions (REP) Replacing electrical steering box active steering

32 13 076 Replacing electrical steering box active steering Important! Connecting line: In the event of moisture/corrosion inside the two plug connections, check the insulation ... battery earth lead Note: High-current-carrying wiring laid with permanent positive connection (80 A fuse). Remove underbody protection Remove stiffening plate (F12/ F01,F02 N74) Remove ...

Repair Instructions (REP) Removing and installing electric steering box (EPS)

32 13 070 Removing and installing electric steering box (EPS) Only for hybrid vehicle: Warning! The following points must be strictly observed prior to starting work: Observe safety ... preliminary tasks: Disconnect battery earth lead Note: High-current-carrying wiring laid with permanent positive connection (80 A fuse). Remove underbody protection at front and rear Remove cover ...

Repair Instructions (REP) Replacing bulb for glove box light

63 99 461 Replacing bulb for glove box light Warning! Follow instructions for handling light bulbs (interior lights). Necessary preliminary tasks: Remove glovebox light Turn bulb holder (1) in direction of arrow and pull out of light (2). Installation note: Make sure bulb holder (1) is correctly seated and engaged in light (2). Remove bulb (1) from bulb holder (2 ...

Functional Description (FUB) Interface box

Functional description Interface box Interface box The interface box (ULF-SBX) is used to connect Bluetooth-capable mobile phones to the vehicle electrical system. The interface box ... the mobile phone and the interface box is established automatically. A precondition for this is that the mobile phone has logged on once to the interface box. Functional description ...

Functional Description (FUB) Cooler box

Functional description Cooler box Cooler box The cool box with interior lighting is installed behind the centre armrest of the rear seats. The cool box consists essentially ... -loop control of selected functions) Electric fan Functional description The cool box can be activated from terminal 15N. Using the A/C button, 2 power stages can be switched. The first ...

Functional Description (FUB) Transfer box

Functional description Transfer box Transfer box (VTG) The control unit for the transfer box (VTG control unit) is secured to the transfer box on the transfer-case servomotor. The VTG ... the locking torque at the multidisc clutch in the transfer box in response to the following factors: Demand for required locking torque (comes from the DSC control unit) Condition ...

Repair Instructions (REP) Removing and installing or replacing junction box electronics

61 35 107 Removing and installing or replacing junction box electronics Important! Read and comply with notes on protection against electrostatic discharge (ESD protection). Necessary preliminary work: Partially remove power distribution box for passenger compartment Release screws (1) on junction box electronics (2). Tightening torque 61 14 2AZ. Disconnect plug ...

Repair Instructions (REP) Removing and installing electrical steering box active steering

32 13 075 Removing and installing electrical steering box active steering Important! Connecting line: In the event of moisture/corrosion inside the two plug connections, check ... tasks: Disconnect battery earth lead Note: High-current-carrying wiring laid with permanent positive connection (80 A fuse). Remove underbody protection at front and rear Remove cover ...

Repair Instructions (REP) Removing and installing/replacing electronics box add-on
Applies to: TU

12 90 ... Removing and installing/replacing electronics box add-on Important! Comply with notes on protection against electrostatic damage (ESD protection)! Note: Follow notes ...  (2). Remove cover (3) from supplementary electronics box. Unclip grommet hold-down device (1). Detach rubber grommets (2) from electronics box add-on. Installation note: Make sure ...

Repair Instructions (REP) Replacing power distribution box (luggage compartment)

61 13 042 Replacing power distribution box (luggage compartment) Warning! Observe safety informations for handling vehicle battery. Necessary preliminary tasks: Disconnect battery ... connection (1). Unscrew nuts (2). Remove power distribution box (3). Disconnect all plug connections. Remove power distribution box (1). ...

Wiring Diagram (SSP) Cooler box

Cooler box SP0000061484 10371 Cooler box Kl. 31 Kl. 15 A129 FRM A58 Z2 Kl. 15 6100 FL: ...

Wiring Diagram (SSP) Transfer box
Applies to: NOT entry NOT entrynav NOT nbt NOT nbtevo

Transfer box T6108019 10633 Transfer box CAS FlexRay FlexRay FlexRay FlexRay FlexRay DSC VTG ICM K-CAN K-CAN Kl. 15 WUP Kl. 15 WUP Kl. 15 WUP Kl. 15 WUP Kl. 15 WUP Kl. 15 WUP K-CAN K-CAN ZGM FRM CID CIC CON A91 A58 A51 A16 A12 A42 A88 A78 S69 Z2 A79 T6108019 1 2 3 4 6 5 7 8 10 9 11 ...

Wiring Diagram (SSP) Interface box

Interface box T6109010 10699 Interface box K-CAN K-CAN K-CAN K-CAN PT-CAN MOST MOST MOST MOST FlexRay CID CON JBE 1 2 3 4 5 6 7 8 9 * # 0 * SZL CIC * KOMBI ZGM ULF-SBX A42 A12 A51 A71 B3 E61 B2 E26 A151 A150 A57 A34 A92 A88 A168 Z1 Z2 T6109010 1 2 3 4 6 5 7 8 10 9 11 ...

Wiring Diagram (SSP) Transfer box
Applies to: entry, entrynav, nbt, nbtevo

Transfer box SP0000058950 10633 Transfer box ICM CON HU-B HU-H JBE VTG DSC FRM ZGM A91 X13*2B CAS A79 A58 A51 A16 A12 A34 A42 A88 A78 S69 Z2 X13*10B X188*1B FLEXRAY FLEXRAY FLEXRAY FLEXRAY FLEXRAY FLEXRAY FLEXRAY FLEXRAY FLEXRAY FLEXRAY K-CAN2 K-CAN2 K-CAN2 K-CAN2 K-CAN2 K-CAN2 K-CAN2 K-CAN2 K-CAN2 K-CAN2 Kl. 15 Kl. 15 Kl. 15 Kl. 15 Kl. 15 Kl. 31 Kl. 30 Kl. 30 Kl. 30 ...

Functional Description (FUB) Power distribution box

... include the following: Valvetronic Ignition and fuel injection Electric coolant pump The power distribution box contains fuses and relays. If one of the fuses or one of the relays is faulty, the complete power distribution box must be replaced. The power distribution box is only installed with certain petrol engines (e.g. N20, N52TU, N55). Functional description The fuse ...

Functional Description (FUB) Power distribution box

... the following supply via a fuse: Terminal 15N to the Digital Motor Electronics (DME) Terminal 87 to the Digital Motor Electronics (DME) Functional description The junction box supplies the power distribution box with terminal 15N. Terminal 87. The fuse box on the vehicle battery supplies the load-shedding relay for ignition and injection. Then, terminal 87 ...

Repair Instructions (REP) Replacing gaiter for steering box on left or right

32 11 100 Replacing gaiter for steering box on left or right Important! The hydraulic steering gear must be replaced if the polished surface of the rack is damaged (e.g. by corrosion)! Necessary preliminary tasks: Remove underbody protection Remove track rod end Clean track rod. Release band clamp (1) and ear clip (3). Detach gaiter (2) from track rod. Installation ...

Repair Instructions (REP) Removing and installing (replacing) Telematic Communication Box

84 10 810 Removing and installing (replacing) Telematic Communication Box Important! Observe the information on protection from electrostatic discharge. Comply with notes and instructions on handling optical fibre. Necessary preliminary tasks: Disconnect battery earth lead Remove luggage compartment wheel arch panel on left. For F10: Partially remove luggage ...

Functional Description (FUB) Junction Box Electronics

... supplied with power from the JBE control unit. Power distribution box The fuses and various plug-in and soldered relays are located in the junction box power distribution box ... internal relays and the relay for wiper stage 1 and wiper stage 2 are located downstream of the fuse on the current path. All other external relays of the junction box electronics lie ...

Repair Instructions (REP) Replacing emergency battery for Telematic Communication Box (TCB)

84 10 011 Replacing emergency battery for Telematic Communication Box (TCB) Important! Observe the information on protection from electrostatic discharge. Necessary preliminary tasks: Remove the Telematic Communication Box (TCB). Open lid (1)·on TCB (2) in direction of arrow. Disconnect connector (1). Remove emergency battery (2) from TCB (3). ...

Repair Instructions (REP) Removing and installing/renewing power distribution box (on battery)

61 14 010 Removing and installing/renewing power distribution box (on battery) Warning! Observe safety information for handling vehicle battery. Necessary preliminary tasks: Disconnect ... brackets (1) downwards and unclip in direction of arrow. If necessary, using a screwdriver, expand locking bracket (1) at lower end and clip out. Remove power distribution box (2) towards ...

Functional Description (FUB) Telematic Communication Box
Applies to: tcb1

Functional description Telematic Communication Box Telematic Communication Box (TCB) The Telematic Communication Box (TCB) performs all Telematic functions in the vehicle ... Telematics Professional. Brief component description The following components for the Telematic Communication Box (TCB) are described: Control unit for Telematic Communication Box (TCB ...

Functional Description (FUB) Junction Box Electronics

Functional description Junction Box Electronics Junction Box Electronics (JBE) Numerous functions are provided in the junction box electronics (JBE). For example, the junction box ... control unit. The PDC is integrated in the junction box electronics (JBE), but it has its own control unit address and diagnosis address. The junction box is an assembly consisting ...

Functional Description (FUB) Glove box light

Functional description Glove box light Glove box light The light is used to illuminate the glove box. Functional description The glove box light can be activated from terminal 30B on. The glove box light is switched on and off when the glove box lid is opened/closed. When the glove box cover is opened the light is switched on by the change in status at the switch ...

Functional Description (FUB) Eject box, front

Functional description Eject box, front Eject box, front The front eject box (also called front baseplate) is installed in the centre console. The front eject box is part of the delivery specification included with factory preparations for a mobile phone. The front eject box is the mount for a snap-in adapter that serves as a cradle for the suitable Bluetooth mobile ...

Functional Description (FUB) E-box fan

Functional description E-box fan E-box fan Extremely high temperatures are encountered in the electronics box. These are caused by the heating from the engine compartment and the power loss from the control units in the electronics box. The maximum permissible operating temperatures must not be exceeded. The expected service life of electronic components increases ...

Functional Description (FUB) Glove box cover

Notes on BMW DIAGNOSIS SYSTEM Glove box cover Repair instruction for the glove box cover Fault cause: The hard hitting of the glove box lid against the end stop leads to a rattling / whirring noise. Repair instructions: Remove the glove box, see repair instructions Bond adhesive tape no. 100 (see document Auxiliary Materials and Operating Fluids ) on both sides ...

Functional Description (FUB) Interface box High

Functional description Interface box High Interface box High The interface box High (ULF-SBX-H) is used to connect Bluetooth-capable mobile phones to the vehicle electrical system. The other functions depend on the vehicle equipment (e.g. M-ASK language processing system, AUX-IN connection with USB connection). The interface box High contains no transmitter ...

Functional Description (FUB) Glove box bush

Notes on BMW diagnosis system Glove box bush Repair instructions for bush in glove box Cause: The bushes are not firmly seated in the glove box housing. Repair instructions: Remove glove box, see repair instructions Use a hot-glue gun to secure the backs of the bushes (clips) with hot-melt adhesive Install glove box . Item Description Item Description 1 Glove box 2 ...

Functional Description (FUB) Telematic Communication Box

Functional description Telematic Communication Box Telematic Communication Box (TCB) The Telematic Communication Box (TCB) is a control unit for telephone functions and telematics ... of the Telematic Communication Box (TCB) is dependent on the series and production date! Observe installation location by means of the wiring diagram! During the installation of a Headunit ...

Functional Description (FUB) Power distribution box, rear

... under which the different system functions are applied. Sufficient voltage supply is thereby ensured in all operating ranges. The rear power distribution box contains fuses. Alongside the fuses, a number of relays are also plugged into or soldered onto the printed circuit board. If one of the soldered relays is faulty, the complete rear power distribution box must ...

Functional Description (FUB) Glove box rack

Notes on BMW diagnosis system Glove box rack Repair instructions for the rack on the folding compartment Cause: The rack of the folding compartment is rattling against the support. Repair instructions: Remove fold-down compartment, see repair instructions Adhere felt strip to back of rack support Install fold-down compartment . Item Description Item Description 1 ...

Wiring Diagram (SSP) Interface box High

Interface box High T6109009 10698 Interface box High K-CAN K-CAN K-CAN K-CAN PT-CAN MOST MOST MOST MOST FlexRay CID CON JBE 1 2 3 4 5 6 7 8 9 * # 0 * SZL CIC * KOMBI ZGM ULF-SBX-H A42 A12 A51 A71 B3 E61 B2 E26 A151 A150 A57 A34 A92 A88 A169 Z1 Z2 T6109009 1 2 3 4 6 5 7 8 10 9 11 ...

Wiring Diagram (SSP) Supply junction box electronics

Supply junction box electronics SP000005004310042Supply junction box electronics Z3 Fuse box 30 F504 250A Z3*15B RT 25.0 30<504 Z1*11B 1 A34*1B 23 BR 4.0 31 GE/RT 0.35 K_CAN2_H GE/BR 0.35 K_CAN2_L X72*1V X72*2V rear window lift central locking system F9 30A F7 30A F14 15A F8 30A F15 20A Z1 Junction box A34 31 30 31 left-hand drive right-hand drive Z10*5B Z10*6B GN ...

Functional Description (FUB) Glove box light switch

Functional description Glove box light switch Glove box light switch Using this switch, the glove box light is switched on and off whenever the glove box cover is opened and closed. The switch is installed to one side of the glove box. Note! The installation location of the glove box light switch is dependent on the series. The correct installation location can ...

Functional Description (FUB) Glove box cover rattling

Notes on BMW DIAGNOSIS SYSTEM Glove box cover rattling Repair instruction for the glove box cover Fault cause: Play in glove box cover hinge. Carry out following check: Press lightly on the glove box cover in the area marked Check whether the noise can be reproduced. Item Description Item Description 1 Area of glove box cover Repair instructions: 1. Refit the glove ...

Functional Description (FUB) USB connection, glove box

Functional description USB connection, glove box USB connection, glove box The USB connection in the glove box is available for performing an import/export (data copy or data backup). Data import/export only possible via glove box USB connection Data for the Car Information Computer (CIC) can only be imported/exported via the USB connection in the glove box ...

Functional Description (FUB) Glove box rattling noise

Notes on BMW diagnosis system Glove box rattling noise Repair instructions for glove box Fault cause: Glove box is not correctly fastened. Repair instructions: 1. Renew clip nuts Remove the glove box, see repair instructions Renew clip nuts Item Description Item Description 1 Clip nuts 2 Dashboard bracket 3 Recess for guide pins from glove box 2. Bond adhesive tape ...

Functional Description (FUB) The cover of the glove box is rattling

Notes on BMW diagnosis system The cover of the glove box is rattling Repair instructions for the glove box Fault cause: The cover of the housing of the glove box creates the rattling noise. Repair instructions: Remove the glove box housing cover Cut the adhesive tape no. 110 (see document Help and operating fluids) to a size of 30 mm x 10 mm Bond the adhesive tape ...

Functional Description (FUB) Glove box cover, inner

Notes on BMW diagnosis system Glove box cover, inner Repair instructions for the covers in the glove box, inner Fault cause: A cover in the interior of the glove box is in contact with the housing of the glove box. Carry out following check: Open glove box cover Knock against the covers in the inside of the glove box, see graphic Index Description Index Description 1 ...

Functional Description (FUB) Glove box cross-member

Notes on BMW diagnosis system Glove box cross-member Repair instructions for cross-member on glove box Cause: Unfavourable tolerances between the components cause rattling noises. Repair instructions: Remove the glove box and storage compartment above the glove box, see repair instructions Bond a piece of felt number 208 (see document Auxiliary materials ...

Functional Description (FUB) Steering box dust cover

Notes on BMW diagnosis system Steering box dust cover Dust cover repair instructions on the steering box Fault cause: The dust cover has contact to the steering box housing. Carry out following check: Check whether the dust cover to the steering box housing has freedom of movement. Repair instructions: Loosen the screw connection of the bottom steering shaft ...

Wiring Diagram (SSP) ULF-SBX interface box
Applies to: ulf2_60 2009/09+

ULF-SBX interface box SP000005212910356ULF-SBX interface box Z1 Junction box 30B F27 5A E26 Roof aerial Z1*10B 3 RT/SW 0.35 30B<27 BR 0.35 31L WS/GE 0.35 CRADLE_O ANT_TEL E26*1B A57*2B A57 Eject box Z10*12B 5 2 X29*1B 13 A168*1B 11 WS 0.35 MIC1+ GN 0.35 MIC1- W9110.2 1 B3*1B 2 W9110.2 W9110.2 WS 0.35 MIC2+ BL 0.35 MIC2- W9110.2 1 B2*1B 2 W9110.2 W9110.2 X339*1V ...

Wiring Diagram (SSP) ULF-SBX interface box
Applies to: ulf2_60 -2009/08

ULF-SBX interface box SP000005030810356ULF-SBX interface box Z1 Junction box 30B F27 5A E26 Roof aerial Z1*10B 5 RT/SW 0.35 30B<27 BR 0.35 31 WS/GE 0.35 CRADLE_O ANT_TEL E26*1B A57*2B A57 Eject box Z10*12B 5 2 X29*1B 13 A168*1B 11 WS 0.35 MIC1+ GN 0.35 MIC1- W9110.2 1 B3*1B 2 W9110.2 W9110.2 WS 0.35 MIC2+ BL 0.35 MIC2- W9110.2 1 B2*1B 2 W9110.2 W9110.2 X339*1V ...

Wiring Diagram (SSP) Telematic Communication Box supply

Telematic Communication Box supply SP000006068610921Telematic Communication Box supply Z1 Junction box 30F F23 5A Z1*10B 1 RT/BL 0.75 30F<23 GE/RT 0.35 K_CAN2_H X77*1V GE/BR 0.35 K_CAN2_L X77*2V 31 31 A231 Telematic Communication Box A231*1B 14 BR 0.75 31 Z10*12B 1 5 A231*1B 6 7 A331*1B 9 A331*3B 3 A331*3B 4 2nd generation 2nd generation 1st generation 1st ...

Functional Description (FUB) Glove box lid check

Notes on BMW DIAGNOSIS SYSTEM Glove box lid check ...

Functional Description (FUB) The cover of the glove box is rattling

Notes on BMW diagnosis system The cover of the glove box is rattling ...

Wiring Diagram (SSP) A231 Telematics Communication Box
Applies to: tcb1, tcb4g

A231 Telematics Communication Box SP000006101011167A231 Telematics Communication Box GR/GE 0.35 NOTRUF_S GR/BL 0.35 NOTRUF_L 19 X188*1B 18 A42 WS 0.35 MIC+ GN 0.35 MIC- W9110.2 W9110.2 1 B3*1B 2 W9110.2 W9110.2 WS 0.35 MIC+ BL 0.35 MIC- 1 B2*1B 2 W9110.2 W9110.2 A231 Telematic Communication Box B3 B2 left-hand drive right-hand drive 13 12 11 A231*1B WS 0.35 MIC+ RT ...

Functional Description (FUB) Power distribution box, engine compartment

... -power electric fan 4 Voltage supply for the battery power distribution box Structure and inner electrical connection There are no relays and fuses in the engine compartment power ... Functional description Power distribution box, engine compartment Power distribution box, engine compartment The power distribution box in the engine compartment supplies voltage ...

Functional Description (FUB) Fuse holder

... bus. The transmit/receive system for the local interconnect network bus is integrated in the electrical machine electronics (EME). The fuse box 2 (also called: battery power distribution box 2) is an adopted component. Two lines in the power distribution box 2 that are connected to the terminal 30 power distribution box are protected with fuses. One line leads ...

Wiring Diagram (SSP) Power distribution box, rear

Power distribution box, rear SP0000056903 11115 Power distribution box, rear A90 A248 E67 E5 A22 B113 F200 F128 F108 F116 F177 F121 F139 F127 F113 F100 F101 F103 F151 F190 F122 F150 F119 F145 F107 F130 F129 F123 F132 F133 F134 F135 F136 F148 F149 F120 F143 F142 F147 F184 F185 F186 F140 F126 F138 F187 F188 F146 F105 F144 F115 F152 F111 F141 F118 F112 F125 F114 F153 ...

Repair Instructions (REP) Checking instrument/inscription lighting, interior/luggage compartment/glove box lights and blower

00 00 ... Checking instrument/inscription lighting, interior/luggage compartment/glove box lights and blower Instrument lighting Check function of instrument and indicator/warning ... windows; electric slide/tilt sunroof; fog lamp. Interior lighting, glove box light and luggage compartment lights Check function of footwell lighting, front and rear reading lights, make-up ...

Wiring Diagram (SSP) A34 Junction box, electronics

A34 Junction box, electronics SP000006191111548A34 Junction box, electronics A34 Z1 Junction box 30 F9 30A 30 F7 30A 30 F8 30A 30 F14 15A 30 F15 20A Z3 30 F504 250A RT 25.0 30<504 22 X188*1B 23 GE/RT 0.35 K_CAN2_H 1 Z1*11B GE/BR 0.35 K_CAN2_L 1 11 X13*10B 1 2 5 6 43 42 A34*2B SW/GE 0.35 PWM VI/GN 0.5 MAG_KUP 1 7 A34*1B WS/BR/GE WS/BR 0.35 AC_LIN_2 Y8 3 2 Y8*1B GE ...

Wiring Diagram (SSP) Fuse F178

... X13*10B 10 RT 2.5 30<178 A79 Transfer box A6500*1B 1 N20/N55 engine X13*10B 10 RT/BR 2.5 30<178 A220 Regulated rear axle differentiallock A220*2B 1 Z3 Fuse box 30 F506 150A Z3*9B 1 RT 25.0 30<506 Z3 Fuse box 30 F503 100A Z3*4B 1 RT 16.0 30<503 up to 2010_08 from 2010_09 0140 ...

Wiring Diagram (SSP) Fuse F138

... 30B<138 A220 Regulated rear axle differentiallock A220*2B 2 Z3 Fuse box 30 F506 150A Z3*9B 1 RT 25.0 30<506 Z3 Fuse box 30 F503 100A Z3*4B 1 RT 16.0 30<503 up to 2010_08 from ... Fuse F138 SP000005217610259Fuse F138 RT/GN/GE 0.35 30B_1 RT/GE 0.35 30B<138 A16 Car access system A16*1B 2 Z2*25B 1 Z2*1B 10 Z2 Fuse holder, rear1)Relay, terminal 30B F138 5A 30B 1 ...

Wiring Diagram (SSP) Fuse F203
Applies to: 2009/11+

Fuse F203 SP000005389310326Fuse F203 BL/GE 0.35 S_HHS A34*1B 4 Z2*25B 1 Z2*1B 14 Z2 Fuse carrier, rear4)Relay, rear window defogger F203 30A 87 4 Z2*4B 6 RT 2.5 87<203 E103*5B 1 E103 Wave trap Z3 Fuse box 30 F506 150A Z3*9B 1 Z3 Fuse box 30 F503 100A Z3*4B 1 RT 25.0 30<506 RT 16.0 30<503 up to 2010_08 from 2010_09 Z1 Junction box A34 0140 ...

Wiring Diagram (SSP) Fuse F204
Applies to: 2009/11+

Fuse F204 SP000005389210327Fuse F204 BL/GE 0.35 S_HHS A34*1B 4 Z2*25B 1 Z2*1B 14 Z2 Fuse carrier, rear4)Relay, rear window defogger F204 30A 87 4 Z2*4B 7 RT/GE 2.5 87<204 E103*4B 1 E103 Wave trap Z3 Fuse box 30 F506 150A Z3*9B 1 Z3 Fuse box 30 F503 100A Z3*4B 1 RT 25.0 30<506 RT 16.0 30<503 up to 2010_08 from 2010_09 Z1 Junction box A34 0140 ...

Wiring Diagram (SSP) Fuse F100

Fuse F100 SP000005022210221Fuse F100 BL/RT 0.35 30F_EIN RT/VI 1.5 30F<100 Z2*25B 1 BL/BR 0.35 30F_AUS Z2*2B 1 Z1 Junction box A34 Z2 Fuse holder, rear3)Bistable relay 3 F100 20A 30F 3 Z2*1B 5 35 A34*1B 40 Z3 Fuse box 30 F506 150A Z3*9B 1 RT 25.0 30<506 Z3 Fuse box 30 F503 100A Z3*4B 1 RT 16.0 30<503 up to 2010_08 from 2010_09 A36 Trailer module A36*1B 13 A36 ...

Wiring Diagram (SSP) Fuse F504

Fuse F504 SP0000050227 10332 Fuse F504 Z3 Fuse box 30 F504 250A RT 25.0 30<504 Z1 Junction box Z1*11B 1 G1 Battery Z3*15B 0140 ...

Wiring Diagram (SSP) Fuse F9

Fuse F9 SP0000050238 10155 Fuse F9 Z3 Fuse box 30 F504 250A RT 25.0 30<504 Z1*11B 1 Z1 Junction box F9 30A 30 A34 Z3*15B 0140 ...

Wiring Diagram (SSP) Fuse F7

Fuse F7 SP0000050236 10153 Fuse F7 Z3 Fuse box 30 F504 250A RT 25.0 30<504 Z1*11B 1 Z1 Junction box F7 30A 30 A34 Z3*15B 0140 ...

Wiring Diagram (SSP) Fuse F14

Fuse F14 SP0000050239 10160 Fuse F14 Z3 Fuse box 30 F504 250A RT 25.0 30<504 Z1*11B 1 Z1 Junction box F14 15A 30 A34 Z3*15B 0140 ...

Wiring Diagram (SSP) Fuse F8

Fuse F8 SP0000050237 10154 Fuse F8 Z3 Fuse box 30 F504 250A RT 25.0 30<504 Z1*11B 1 Z1 Junction box F8 30A 30 A34 Z3*15B 0140 ...

Wiring Diagram (SSP) Fuse F128
Applies to: -2010/08

Fuse F128 SP0000050220 10249 Fuse F128 Z3 Fuse box 30 F503 100A Z3*4B 1 RT 16.0 30<503 GN 0.35 15N GN/SW 0.75 15N<128 A16 Car access system A16*1B 1 Z2*25B 1 Z2*1B 7 Z2 Fuse holder, rear 2) Relay, terminal 15N F128 10A 15N 2 Z2*9B 2 A129 Cooler box A129*1B 1 0140 ...

Wiring Diagram (SSP) Fuse F177

Fuse F177 SP000005018310300Fuse F177 Z2 Fuse holder, rear 30 F177 20A Z2*25B 1 RT/GE 1.5 30<177 N4*1B 3 Z2*3B 1 N4 Output stage for rear compart-ment fan motor Z3 Fuse box 30 F503 100A RT 16.0 30<503 Z3*4B 1 Z3 Fuse box 30 F506 150A RT 25.0 30<506 Z3*9B 1 up to 2010_08 from 2010_09 0140 ...

Wiring Diagram (SSP) Fuse F101
Applies to: -2010/08

Fuse F101 SP0000050223 10222 Fuse F101 Z3 Fuse box 30 F503 100A Z3*4B 1 RT 16.0 30<503 BL/RT 0.35 30F_EIN RT/WS 4.0 30F<101 Z2*25B 1 BL/BR 0.35 30F_AUS Z2*2B 2 A58 Footwell module A58*3B 34 Z1 Junction box A34 Z2 Fuse holder, rear 3) Bistable relay 3 F101 40A 30F 3 Z2*1B 5 35 A34*1B 40 0140 ...

Can't find what you're looking for? Keep the following in mind for better results:
  • This site is a translation of the original German documentation into international English, and therefore things may be called differently from what you're used to in your dialect (think for example: subframe vs. axle carrier, bushing vs. rubber mount, differential vs. final drive, sway bar vs. anti-roll bar, and so forth)
  • There may not be a writeup specifically on "replacing subframe bushes", because it is incorporated into a larger one for "removing the axle carrier". Try broadening the scope if your search comes up empty.
  • When there are too many matches, only the most relevant results are displayed.
Sponsored links