51 23 100Removing and installing/replacing right engine hood/bonnet lock

Unclip coupling (1) from side panel.

Lever out cover (2) at coupling (1).

Lever Bowden cable (3) out of coupling (1).

Unclip Bowden cable (1) from holder (2).
Note:

Illustration shows A/C lines and module carrier cover removed for purposes of clarity.


Release bolts (1).

Tightening torque 51 23 2AZ.

Feed out hood/bonnet lock (2) through opening (3).

Disconnect plug connection (1), unclip plug and cable from body.

Disengage Bowden cable (1) in direction of arrow from hood/bonnet lock (3).

 

Replacement:

Remove switch (4).

Sponsored links