64 11 212Removing and installing/replacing heater/air conditioner fan

Necessary preliminary tasks:

Release screws (1).
Release screws (1) and remove air duct (2).
Release screws (1).
Important!

Risk of damage to instrument panel trim (2) if it is pulled away too forcefully.


Release screw (1).

Carefully pull instrument panel trim (2) away in direction of arrow and feed out fan (3).

Disconnect plug connection (1).Installation:

Make sure cover (2) is securely seated.


Replacement:

Disconnect plug connection (1) and release screws (2).

Remove controller for fan (3).

Sponsored links