51 16 200Removing and installing center console

- Remove radio receiver.

- Remove switch for Dynamic Stability Control.

- Remove switch for tire pressure warning.

- Remove trim for center console.

- Remove center fresh air grill.

Open cover for telephone.

Remove rubber plug (1).

Release screws (2).

Press down release element (3) for cover and lift out storage tray (4).

 

Remove screws (1) and (2).

 

Release side screws.

 

Remove screws (1) on left/right of holder (3) from center console.

Detach wiring harness (2) from holder (3) and expose.

Remove screws (1) and (2).

 

Close cover for telephone.

Lift storage tray (1) at rear.

Disconnect all plug connections and remove storage tray.

 

Sponsored links