61 61 100Removing and installing/replacing both windshield wiper arms

Special tools required:

Note:
Removal of the windshield wiper arms is described separately for the driver's and passenger sides.
Driver's side:
Remove cover.
Release screw (1) with special tool 61 6 010 .Installation:

Clean Loctite residue off thread.

Replace screw (1) and insert with Loctite.

Tightening torque, 61 61 10AZ


Caution!

Do not bend windshield wiper arm when removing it (risk of breakage!).


Release nut (2) with special tool 61 6 010 . Detach windshield wiper arm with special tool 61 6 060 .Installation:

Tightening torque, 61 61 10AZ


Installation:

Insert screw (1) against tappet (3) until specified dimension (A) between contact pressure adjustment lever (2) and wiper arm (4) is achieved.

The nut can be tightened better by pressing down the wiper arm gently on the windshield.

Specified dimension A = 1.3 mm


Passenger side:
Remove caps.
Unscrew nuts. Installation:

Tightening torque, 61 61 10AZ


Caution!

Do not bend windshield wiper arms when removing them (risk of breakage!).


Detach both wiper arms with special tool 61 6 060 .
Sponsored links