54 34 002Initializing EM convertible top after emergency release (convertible top unlocked)
Connecting up drives:
Both drive units are unlocked and access in trunk is not possible (electrical forced locking of trunk lid).
Open side windows.
Turn central handle and raise convertible top over dead center point, microswitch (S4) cuts in (convertible top not overstretched).
Raise clamping bracket into upright position.
Open convertible top cover manually and store in convertible top box - micro-switch (S3) cuts in (convertible top stowed away).
|Close convertible top lid (closing brackets must locate in locks on left and right sides).|
Before engaging the drive units, push unlocking lever fully back (Bowden cables fully retracted). If necessary, raise the seat.
Removing left luggage compartment trim,
Push motor (A) for convertible top drive upwards, engage and allow to locate.
In tooth-to-tooth setting (motor cannot be engaged), press down convertible top gently and engage motor.
Pull motor (B) for convertible top lid drive inwards, engage and allow to locate.
In tooth-to-tooth setting (motor cannot be engaged), press down convertible top lid gently and engage motor.
Close luggage compartment lid.
|Now completely close the convertible top (perform function check).|
Initialization with diagnosis:
Convertible top stowed in convertible top box and drive units connected up.
Initialization, refer to BMW diagnosis system.
Emergency actuation of convertible top:
Open side windows and left door.
Push left front seat forwards and fold down.
No-one must be sitting on the rear seat at this time.